ATS-5X User Manual Page 38 of 44
4 Specifications
The specifications are subject to change without notice.
Transmitter
Frequency
Range: 50 Hz to 20 kHz
Resolution: 1 Hz
Accuracy: ±20 ppm
Transmit Level
Range: -40 dBm to +10 dBm
Resolution: 0.01 dB
Harmonic Distortion (to 20 kHz)
< 0.5% for transmitter levels between -15 dBm and +10 dBm and frequencies between 200 Hz and 10 kHz
< 1% for transmitter levels between -30 dBm and -15 dBm and frequencies between 200 Hz and 10 kHz
< 3% elsewhere
Source Impedance
Settings: 600Ω, 900Ω
Accuracy: ±5%
Flatness: ±5%
Receiver
Frequency
Range: 50 Hz to 20 kHz
Resolution: 1 Hz
Accuracy: ±1 Hz
Receive Level
Range: -80 dBm to +10 dBm
Resolution: 0.01 dB
Accuracy: ±0.1 dB at 1004 Hz from -20 dBm to +10 dBm
±0.2 dB elsewhere
Flatness: 0.5 dB
Detector: DFT
Noise Level
Range: 0 dBrn to +100 dBrn
Resolution: 0.01 dB
Accuracy: ±2 dB from 0 dBrn to 10 dBrn
±1 dB elsewhere
Noise with Tone
Range: 0 dBrn to +100 dBrn
Resolution: 0.01 dB
Accuracy: ±3 dB from 0 dBrn to 10 dBrn
±2 dB elsewhere (reference IEEE 743-1995 notch filter definition)
Termination Impedance
Settings: 600Ω, 900Ω, bridging (> 25kΩ)
Accuracy: ±5%
Flatness: ±5%
To Next Page
Loading...