35
Procedure for use
To access this function, see
instructions in section
”Manual mode”.
Detergent signals and water flushing
FLUSH WATER:
This function uses water to clear detergent
from the supply tubes of the detergent dispen-
sing system.
POWDER SIGNAL:
This function will either: a) use water to dispen-
se detergent from machine compartments, or:
b) dispense detergent from an external system.
The number of valves present will vary accor-
ding to the machine type.
Detergent/flush
Use b and c to select
the function you require.
Press SELECT.
When you have finished:
Press b repeatedly to
highlight ”EXIT”.
Press OPEN.
The function will be activated
for as long as you press and
hold this key. The function
ceases as soon as you re-
lease the key.
3684
OPEN
FLUSH WATER
POWDER SIGNAL 1
POWDER SIGNAL 2
POWDER SIGNAL 3
POWDER SIGNAL 4
POWDER SIGNAL 5
LIQUID SIGNAL 1
LIQUID SIGNAL 2
LIQUID SIGNAL 3
LIQUID SIGNAL 4
LIQUID SIGNAL 5
LIQUID SIGNAL 6
LIQUID SIGNAL 7
LIQUID SIGNAL 8
EXIT
OPEN
SELECT
MANUAL MODE
DETERGENT/FLUSH
FLUSH WATER
POWDER SIGNAL 1
POWDER SIGNAL 2
POWDER SIGNAL 3
POWDER SIGNAL 4
POWDER SIGNAL 5
FLUSH WATER
POWDER SIGNAL 1
POWDER SIGNAL 2
POWDER SIGNAL 3
POWDER SIGNAL 4
POWDER SIGNAL 5
LIQUID SIGNAL 1
LIQUID SIGNAL 2
LIQUID SIGNAL 3
LIQUID SIGNAL 4
LIQUID SIGNAL 5
LIQUID SIGNAL 6
LIQUID SIGNAL 7
LIQUID SIGNAL 8
EXIT
Note!
For this function, all of the menus will not be
available on machines with one I/O board.
To Next Page
Loading...
Need help?
General
