Electrolux W3 SERIES - Page 48

48
Procedure for use
Read tare value
Press b four times to
highlight ”READ TARE
VALUE”.
Press SELECT.
This screen shows the
stored tare parameter (unit:
hectograms (1 hectogram
= 100 grams).
Press SELECT.
Read tare value
This function lets you check the value currently stored
as the tare parameter.
For machines with weighing equipment installed only!
4780
SERVICEPROGRAM
MAKE A CHOICE:
RESET SCALE TO ZERO
RESET TARE TO ZERO
TARE SCALE
SETTARETOACERTAINVALUE
READTAREVALUE
CALIBRATE THE SCALE
SELECT
RESET SCALE TO ZERO
RESET TARE TO ZERO
TARE SCALE
SETTARETOACERTAINVALUE
READ TARE VALUE
CALIBRATE THE SCALE
ZERO CALIBRATION
READVERSIONNUMBER
EXIT
SELECT
SCALE ADJUSTMENTS
READTAREVALUE
10 HG
SELECT
SELECT
3588