Electrolux W475H - Cleaning Mop Elements

71
Cleaning the mop elements
• Depending on the size of the machine,
you will find one or two core covers in the
machine’s inner drum so that the elements
can be cleaned if so required. The front cover
is located directly above the drain, while the
other is in front of the element retainer.
Two small screwdrivers are required to remo
-
ve the core cover.
• Use a screwdriver to press down on the
retaining plate in the round hole on the core
cover.
• Place the other screwdriver in the oval hole
on the core cover and through the round hold
in the retaining plate
• Push the retaining plate towards the screw
-
driver which is pressing down on the retaining
plate.
• Remove the core element/elements and clean
the elements. If the elements are very dirty, it
may be wise to remove the elements from the
drum when cleaning them.
• The core covers are refitted in reverse order,
with the difference that it is not necessary to
press on the retaining plate; you only need
to push the retaining plate back into place.
When you hear a clicking sound, the retaining
plate is in position.
Maintenance
2
3
4
1
1
2
3
4