Technical Support - DMM 60/80 599 74 98-60 Rev.00
Pull the detergent container out and at the same time press the stop locking
it in place.
Loosen the screws that attach the control panel to the detergent tray.
Pull out the clamp from the crosspiece.
Remove the four screws which secure the crosspiece to the cabinet.
Remove the screws which secure the crosspiece to the detergent container.
Release the anchor tab which secures the detergent container to the
crosspiece.
Raise both sides of the control panel so as to pull out the hooks which
secure it to the front panel.
To Next Page
Loading...
