To Next PageTo Next Page
Need help?Do you have a question about the Elgas ELCOR and is the answer not in the manual?
Device overview and functionality to convert gas volume from operating to base conditions.
Details on different ELCOR, ELCORplus, DATCOM, and Indexer models and their features.
Guidelines for safe operation in explosive environments, including zone specifications.
Specific operational requirements and warnings, including electrostatic charge prevention.
Explosion safety levels and types of protection for ELCOR and ELCORplus devices.
Specifies the relative and typical total error of the corrector and measurement errors.
Details on measurement principles, reference conditions, and compressibility calculation methods.
Details on serial interfaces, optical head, and modem capabilities for data exchange.
Procedures for mounting the device on walls, pipes, and gas meters, with diagrams.
Requirements for interference and EMC, including surge protection and grounding principles.
Steps for initial device setup, battery connection, and parameter configuration.
Overview of the device's menu structure, including actual values, archives, and system data.
Details on different types of archives (data, daily, monthly, binary) and navigation within them.
Explanation of compressibility factor calculation methods and their limitations.
Information on internal modems (2G/4G), external antennas, and their configurations.
Guidelines for connecting external devices (PC, modem) using RS232 interface and communication barriers.
General| Brand | Elgas |
|---|---|
| Model | ELCOR |
| Category | Data Loggers |
| Language | English |
