ELNA eXperience 660 - SECTION III -Programming Combinations; Single Repeat with Lockstitch

33
SECTION III - Programming Combinations
(Must have 3 Digit Mode
Activated)
Single Repeat with Lockstitch
Select 035.
(Machine automatically converts to show selected
stitch image and information after third digit is
pressed.)
Press “Mirror Image” key.
Press “Elongation” key.
Press “Stitch Length” key and change stitch length to
0.30.
Press “ENTER” key to memorize. A blinking cursor will
appear to indicate where next selected and entered
stitch will be memorized within the sequence.
 Select 200.
Press “ENTER” key.
 Place fabric and stabilizer under foot and sew. Machine
will lockstitch, sew the design, lockstitch and stop.