46
Warning Messages
Three beep sounds will alert you to machine problems. The LCD screen will show one of these messages.
Reason
Power switch is turned on while foot control
is pressed.
Presser foot is up when sewing is
attempted.
While sewing, presser foot is raised.
The machine was stopped before lockstitch
was completed.
The Twin Needle Key has been pressed
after selecting a stitch that is not compatible
with a twin needle inserted.
What to Do
Release the foot control.
Lower presser foot.
Lower presser foot.
Start machine and allow
lockstitch to complete.
Select a different stitch or
sew with a single needle.
Message
To Next Page
Loading...
