Need help?Do you have a question about the ELPRO 105U and is the answer not in the manual?
General| Output Type | Relay |
|---|---|
| Analog Inputs | 0 |
| Analog Outputs | 0 |
| Protection Class | IP20 |
| Input Current | 100 mA |
| Digital Outputs | 4 |
| Communication Interface | RS-485 |
| Output Voltage Range | 24 V DC |
| Current Consumption | 100 mA |
Overview of the 105U-G Wireless Gateway products and their applications.
Explains how the 105G connects and communicates with host devices via different data bus protocols.
Details on installing and using the configuration software for setting up the 105U system.
Explains how to set up I/O mappings to transfer signals between modules.
Describes configuring block mappings for efficient data transfer between 105G modules.
Details configuring Modbus slave and master interfaces for data communication.
Explains DF1 protocol configuration for communication with Allen-Bradley devices.
Covers Profibus DP Slave configuration, address allocation, and links.
Details Ethernet interface configuration, including Modbus/TCP and EtherNet/IP.
To Next Page
