ESR Series Routers Operation Manual 11
2.2.7 Network security functions
The table lists network security functions of the device.
Table 2.7 —Network security functions
All router interfaces are distributed by security areas.
For each zone pair, you can set the rules that define the possibility of data
transmission between zones, data traffic filtering rules.
For each zone pair, you can define the rule set that manages the filtering process
for data transmitted through the router.
Device command interface provides appropriate means for detailed configuration
of the traffic classification rules and to apply the resulting solution for traffic
transmission.
2.3 Main specifications
Table 2.8 lists main specifications of the router.
Table 2.8 —Main specifications
12 x Ethernet 10/100/1000Base-T
4 x Ethernet 10/100/1000Base-T/1000Base-X Combo
8 x 10GBase-R/1000Base-X (SFP+/SFP)
24 x Ethernet 10/100/1000Base-T
2 x 10G Base Base-R/1000Base-X (SFP+/SFP)
x Ethernet 10/100/1000Base-T / 1000 Base-X Combo
4 x Ethernet 10/100/1000Base-T
x Ethernet 10/100/1000Base-T / 1000 Base-X Combo
Types of optical
transceivers
1000BASE-X SFP, 10GBASE-R SFP+
Duplex or half-duplex interface modes
- duplex and half-duplex modes for electric ports
- duplex mode for optical ports
ESR-1000 router maximum bandwidth
(hardware switching)
Integrated switch buffer memory
(for ESR-1000)
- electric interfaces 10/100/1000Mbps
- optical interfaces 1/10Gbps
- electric interfaces 10/100/1000Mbps
- optical interfaces 1Gbps
MAC address table
(for ESR-1000)
up to 4K active VLANs according to 802.1Q
Quantity of L3 interfaces