ELTEX ESR-100 - Page 62

62 ESR Series Routers Operation Manual
esr(config-bgp-af)# neighbor 219.0.0.2
esr(config-bgp-neighbor)# remote-as 2500
esr(config-bgp-neighbor)# enable
esr(config-bgp-neighbor)# exit
Enable protocol operation:
esr(config-bgp-af)# enable
esr(config-bgp-af)# exit
esr(config)# exit
Configuration changes will take effect when the configuration is applied:
esr# commit
Configuration has been successfully committed
esr# confirm
Configuration has been successfully confirmed
esr#
To view BGP peer information, use the following command:
esr# show ip bgp 2500 neighbors
To view BGP routing table, use the following command:
esr# show ip bgp
You should open TCP port 179 in the firewall.