ELTEX MES1000 User Manual

194 MES1000, MES2000 Ethernet Switches
Router IP address should be located in the same subnet as
the client.
no default-router
Sets the default value.
dns-server ip_address
[ip_address 2 ... ip_address
8]
The list of DNS servers is not
defined by default.
Defines the list of DNS servers available to DHCP clients.
no dns-server
Sets the default value.
domain-name domain
(1–32) characters
Defines the domain name for DHCP clients.
no domain-name
Sets the default value.
netbios-name-server
ip_address_list
The list of WINS servers is
not defined by default.
Defines the list of WINS servers available to DHCP clients.
- ip_address_list: list of TFTP server IP addresses; may contain
up to 8 space-delimited entries.
no netbios-name-server
Sets the default value.
netbios-node-type
{b-node | p-node | m-
node | h-node}
The type of the NetBIOS
node is not defined by
default.
Defines the type of the NetBIOS Microsoft node for DHCP
clients:
- b-node—broadcast node;
- p-node—point-to-point;
- m-node—mixed node;
- h-node—hybrid node.
no netbios-node-type
Sets the default value.
next-server ip_address
-
The command is used to inform DHCP client about address of
the server (TFTP as a rule) with the load file.
no next-server
Sets the default value.
next-server-name name
(1–64) characters
The command is used to inform DHCP client about name of
the server with the load file.
no next-server-name
Sets the default value.
bootfile filename
(1–128) characters
Specifies the name of the file which is used for boot load of
DHCP client.
no bootfile
Sets the default value.
time-server ip_address_list
The list of servers is not
defined by default.
Defines the list of time servers available to DHCP clients.
- ip_address_list: list of TFTP server IP addresses; may contain
up to 8 space-delimited entries.
no time-server
Sets the default value.
option code
{ascii ascii-string |
hex hex-string |
ip ip_address }
option ip-list code
ip_address 1 [ip_address 2
…]
Configures DHCP server options.
- code—code of a DHCP server option;
- ascii-string—an ASCII string;
- hex-string—a hex string;
- ip_address—IP address;
- ip-list—indicates that the code is followed by a list of IP
addresses.
no option code
Removes DHCP server options.
tftp-server ip_address_list
List of servers is not defined
by default.
Option 150 configuration—TFTP server address.
- ip_address_list: list of TFTP server IP addresses; may contain
up to 8 space-delimited entries.
no tftp-server
ip_address_list
Removes Option 150 configuration:
- ip_address_list: list of TFTP server IP addresses; may contain
up to 8 space-delimited entries.
Privileged EXEC Mode Commands
Command line request in the Privileged EXEC mode appears as follows:
console#
Table 5.237 Privileged EXEC mode commands
Command
Value
Action
clear ip dhcp binding
{ ip_address | *}
-
Deletes records from the table which binds physical addresses
with the addresses taken from the pool and assigned by the
DHCP server:
- ip_address—IP address assigned by the DHCP server;
*—delete all records.

ELTEX MES1000 Specifications

General

Brand	ELTEX
Model	MES1000
Category	Switch
Language	English