EasyManuals Logo

ELTEX MES1000 User Manual

ELTEX MES1000
231 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #81 background imageLoading...
Page #81 background image
MES1000, MES2000 Ethernet Switches 81
Privileged EXEC mode commands
Command line request in Privileged EXEC mode appears as follows:
console#
Table 5.54 Privileged EXEC mode commands
Command
Value
Action
clear host dhcp {name | *}
{1..158} characters
(This command is available to privileged users only.)
*delete all matches.
renew dhcp
{gigabitethernet gi_port |
fastethernet fa_port |
port-channel group|
vlan vlan_id} [force-
autoconfig]
gi_port: (1..3/0/1..28);
fa_port: (1..3/0/1..24);
group: (1..8);
vlan_id: (1..4094)
Send the IP address renewal request to DHCP server.
- force-autoconfigdownload the configuration from TFTP
server on IP address renewal.
EXEC mode commands
Command line request in Exec mode appears as follows:
console>
Table 5.55 EXEC mode commands
Command
Value
Action
show ip interface
[gigabitethernet gi_port |
fastethernet fa_port |
port-channel group|
vlan vlan_id]
gi_port: (1..3/0/1..28);
fa_port: (1..3/0/1..24);
group: (1..8);
vlan_id: (1..4094)
Show IP addressing configuration for the specific interface.
Example execution of commands
Define the default gateway IP address192.168.16.2:
console (config)# ip default-gateway 192.168.16.2
5.15 IPv6 addressing configuration
5.15.1 IPv6 protocol
Switches support IPv6 protocol operations. Ipv6 protocol support is the important advantage, since
IPv6 protocol is destined to replace IPv4 protocol addressing completely in the future. In comparison to
IPv4, IPv6 protocol has the extended address space128 bit instead of 32. IPv6 address consists of 8
blocks separated by a colon; each block has 16 bit of the address, represented as 4 hexadecimal numbers.
In addition to address space extension, IPv6 protocol has the hierarchical addressing scheme,
provides route aggregation, simplifies routing table, thus boosting the router performance by using
neighbouring node discovery mechanism.
Local IPv6 addresses (IPv6Z) are assigned to the interfaces by the switch; use the following format in
the command syntax for IPv6Z addresses:
<ipv6-link-local-address>%<interface-name>
where
interface-namename of the interface:

Table of Contents

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the ELTEX MES1000 and is the answer not in the manual?

ELTEX MES1000 Specifications

General IconGeneral
BrandELTEX
ModelMES1000
CategorySwitch
LanguageEnglish

Related product manuals