EasyManua.ls Logo

ELTEX MES1000 User Manual

ELTEX MES1000
231 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Page #1 background imageLoading...
Page #1 background image
L2 Fast Ethernet and Gigabit Ethernet Managed Switches
MES1000, MES2000
Operation Manual,Firmware Version 1.1.42

Table of Contents

Question and Answer IconNeed help?

Do you have a question about the ELTEX MES1000 and is the answer not in the manual?

ELTEX MES1000 Specifications

General IconGeneral
ModelMES1000
LayerL2
VLANNot supported
TypeUnmanaged
Power SupplyExternal 5V DC
Operating Temperature0°C to +40°C
Storage Temperature-40°C to +70°C
Humidity10 to 90% (non-condensing)

Summary

2 PRODUCT DESCRIPTION

2.2 Device Functions

Lists and describes the basic, MAC address processing, and second-layer OSI functions of the switches.

3 INSTALLATION AND CONNECTION

4 DEVICE STARTUP, INITIAL CONFIGURATION

4.3 Configuration procedure

Outlines the necessary information and steps for initial device configuration.

5 DEVICE MANAGEMENT COMMAND LINE INTERFACE

5.2 Basic commands

Lists and describes fundamental commands available in EXEC and Privileged EXEC modes.

5.10 Interface configuration

Covers configuration of Ethernet interfaces, port channels, and VLAN interfaces.

5.27 Security functions

Explains security functions, including port security, port-based authentication (802.1x), DHCP snooping, ARP inspection, and MAC address notification.

5.31 ACL Configuration (Access Control Lists)

Explains Access Control Lists for filtering traffic based on IP, MAC addresses, and TCP/UDP ports.

6 SERVICE MENU, CHANGE OF SOFTWARE

Related product manuals