ELTEX NTU-RG-1421G-WZ User Manual

____________________________________________________________________________________
____________________________________________________________________________________
NTU Optical Network Terminals 19
4 CONFIGURATION OF NTU-RG-1421G-W, NTU-RG-1431G-W, AND NTU-RG-1421GC-W VIA WEB INTERFACE.
USER ACCESS
In order to configure the device it's necessary to connect to it in web browser (hypertext document
viewer), such as Firefox or Google Chrome. To do this, enter the device IP address in the browser address bar
(factory default IP: 192.168.1.1, subnet mask: 255.255.255.0).
After entering IP address, the device requests username and password.
Username: user, password: user.
In order to prevent unauthorised access to the device, the password is recommended to be changed (see
section 4.5.5 Password submenu. Access control configuration (setting passwords).
Given below is a general view of the device configuration window. A navigation tree for object settings is
in the left pane, while the settings editor is to the right.

ELTEX NTU-RG-1421G-WZ Specifications

General

Brand	ELTEX
Model	NTU-RG-1421G-WZ
Category	Touch terminals
Language	English