____________________________________________________________________________________
____________________________________________________________________________________
NTU Optical Network Terminals 7
2.2 Models
NTU-RG series devices are designed to support various interfaces and features—see Table 1.
Table 1 – Models
802.11n, 2*2 -300Mbps –2.4GHz
802.11ac, 3*3 -1.3Gbps – 5 GHz+
802.11n, 3*3 -450Mbps - 2.4GHz
802.11ac, 3*3 -1.3Gbps – 5 GHz
802.11n, 2*2 -300Mbps –2.4GHz
802.11ac, 3*3 -1.3Gbps – 5 GHz+
802.11n, 2*2 -300Mbps –2,4GHz
802.11ac, 3*3 -1.3Gbps – 5 GHz+
2.3 Device Specification
The device is equipped with the following interfaces:
1 x RJ-11 port for analogue phone units;
1 x PON SC/APC port for connection to operator's network;
Ethernet RJ-45 LAN ports for connection of network devices:
– 4 x RJ-45 10/100/1000Base-T ports.
802.11a/b/g/n/ac Wi-Fi transceiver;
2
x USB 2.0 ports for external USB or HDD storage;
Z-Wave submodule
;
1 RF port for CaTV connection
.
The terminal uses an external adapter for 220V/12V power supply.
The device supports the following functions:
Network functions:
– Operation in 'bridge' or 'router' mode;
– PPPoE support (PAP, CHAP, MSCHAP authentication);
– Static IP address and DHCP support (DHCP client on WAN, DHCP server on LAN);
– UPnP;
– IPSec;
– NAT support;
– Firewall support;
– NTP support;
– QoS support;
– IGMP snooping support;
– IGMP proxy support;
– Parental Control;
– Storage Service support;
– UPNP, SMB, FTP, DLNA, Print Server support;
– VLAN complying with IEEE 802.1Q.
NTU-RG-1421GC-Wac has one USB2.0 port
For NTU-RG-1421G-WZ
For NTU-RG-1421GC-Wac