____________________________________________________________________________________
____________________________________________________________________________________
NTU Optical Network Terminals 45
4.3.5 The “Advanced” submenu
Use this menu to configure advanced settings of the wireless network.
– Band—set the frequency band (2.4/5GHz);
– Channel—active channel of the router. Changing operating channel can eliminate interference or
problems that occur in wireless network operation. It is recommended to set this value to ‘Auto’ to
avoid the interference caused by the neighbouring networks.
– Auto Channel Timer (min)—time period (minutes) after which the router will search for an optimal
wireless channel. This parameter is available when Auto channel is selected (enter 0 to disable).
– Standard—set 802.11 standard.
– Auto Channel Set—defines automatic channel selection mode:
To Next Page
Loading...
