____________________________________________________________________________________
____________________________________________________________________________________
NTU Optical Network Terminals 43
– Network Key 1..4—allows specification of 4 different keys, which comprise of 10 hex
characters of 5 ASCII characters
1
for 64-bit encryption. Other options are 26 hex characters or
13 ASCII characters for 128-bit encryption.
Click the Apply/Save to accept the changes.
4.3.3 MAC Filtering submenu. Filtering Settings of MAC Addresses
The menu allows filters configuration for MAC addresses.
– Select SSID—the identifier of the wireless network, for which a rule will be created
– MAC Restrict Mode—filtration mode for MAC addresses
– Disabled—filter will be disabled
– Allow—filters allowed addresses
– Deny—filters denied addresses
In order to add a MAC address to the filtration table, click Add and enter the address into the MAC
address field of the displayed menu.
Click the Apply/Save to accept the changes.
4.3.4 Wireless Bridge submenu. Wireless Connection Settings in Bridge Mode
Use this menu to specify access point operation mode: either access point or wireless bridge.
When the bridge mode is used, MAC addresses of remote bridges should be specified. This mode is used
to establish a wireless connection between two individual networks.
1
ASCII—is a set of 128 characters for machine representation of capital and lower case Latin characters, digits, punctuation
marks, and special symbols.