ELTEX NTU-RG-1421G-WZ - The MAC Filtering Setup Submenu. Filtering Settings for MAC Addresses

____________________________________________________________________________________
____________________________________________________________________________________
NTU Optical Network Terminals 31
– Filter Name—filter text description;
– IP Version—IP protocol version;
– Protocol—the network protocol selected;
– Source MAC address—source MAC address;
– Source IP address[/prefix length]—source IP address (prefix length can be specified after slash);
– Source Port (port or port:port)—source port or port range can be specified after double point;
– Destination IP address [/prefix length]—destination IP address (prefix length may be specified after
slash);
– Destination Port (port or port:port)—destination port or port range can be specified after double point.
WAN (configured in the router mode and having firewall enabled) and LAN Interfaces
– Select All—when checked, choose all available interfaces.
Or choose an interface from the list by selecting the checkbox next to it.
Click the Apply/Save to accept and save the settings.
4.2.3.2 The “MAC Filtering Setup” submenu. Filtering Settings for MAC Addresses
MAC filtration allows traffic to be transferred or blocked depending on source and destination MAC
addresses.