ELTEX NTU-RG-1421G-WZ - The System Log Submenu. System Log Review and Configuration; The Configuration Submenu. System Log Configuration

____________________________________________________________________________________
____________________________________________________________________________________
NTU Optical Network Terminals 51
4.5.6 The “System Log” submenu. System Log Review and Configuration
4.5.6.1 The “Configuration” submenu. System Log Configuration
Use the menu to configure events occurring on the router.
– System log – enable/disable system log;
– Log level – verbosity of the event log. Severity levels in the descending order:
– Emergency;
– Warning;
– Critical;
– Debug.
– Display Level – display level of the event log messages;
– Operation mode – log operation mode:
– Local – all events are returned to the router through the buffer;
– Remote – all events are returned to Syslog server;
– Both – both mode are enabled;
– USB flash driver – sending events on the USB flash driver;
– Linux Kernel Console Display Level (printk) – displays level of messages in Linux console;
– Send CMS logs to syslog – enables/disables CMS messages transmission to the system log.
The following settings are available in the Remote mode:
– Server IP address – IP address of the Syslog server which stores all events;
– Server UDP port – port number of the Syslog server.
Click the Apply/Save button to accept and save the changes.