ELTEX NTU-RG-1421G-WZ - Page 28

____________________________________________________________________________________
____________________________________________________________________________________
28 NTU Optical Network Terminals
– Utilized interface.
Only interfaces that are fit for operation in router mode with enabled network address translation will
be available.
– Application name—application settings:
– Select application—select a preconfigured rule;
– Custom an application—create new rules not listed in the Select an application list.
As opposed to the Virtual Server function, PC's IP address should not be fixed in LAN.
– Trigger Port Start—the first port in the range of ports performing the trigger function.
– Trigger Port End—the last port in the range of ports performing the trigger function.
– Trigger Protocol—the protocol used for trigger.
– Open Port Start—the first port in the range of ports which will be opened by router.
– Open Port End—the last port in the range of ports which will be opened by router.
– Utilized Protocol—the protocol used for opened ports.
Click the Apply/Save button to accept and save the changes.