ELTEX NTU-RG-5402G-W - 4 Device Configuration Via Web Interface. Administrator Access

 NTU-RG-54xx. User manual (user)
21
4 Device configuration via Web interface. Administrator Access
Getting Started
To configure the device, it is necessary to connect to it through Web browser:
1.Open theWeb browser (program for viewing hypertext documents), for example, Firefox, Google
Chrome and etc.
2. Enter the device IP address in the browser address line
When the device is successfully connected, username and password request page will be shown in the
browser window:
3.Enter your username into ‘User Name’ and password into ‘Password’ field.
4. Click the ‘Login’ button. In the browser window, the home page of the device’s web interface will open.
Password changing
To prevent unauthorized access to device in the future, it is recommended to change password. To change the
password enter the new password in theAdmin, menu, «Password», section in the 'NewPassword' and
'Confirmnewpassword' fields.
Factory default IP address: 192.168.1.1 , subnet mask: 255.255.255.0

Username:user, password:user.
