NTU-RG-54xx. User manual (user)
4.7.5 The 'Password' submenu. Access control configuration (setting passwords)
In this section you can change a password to access the device.
Admin → Password
To change the password, you must enter the existing password in the 'Old Password' field, then the new
password in 'New Password' and confirm it with 'Confirmed Password'.
To confirm and save changes, click the'Apply changes'button. Click the'Reset'button to reset the value.
4.7.6 The 'Firmware upgrade' submenu. Software Update
To update firmware, it is necessary to select firmware file by using the'Select file'button and
click'Upgrade'.To reset the value, click the'Reset'button.
Admin → Firmware upgrade
Do not switch off or reboot the device during the update. The process may take several minutes. The
device will be automatically rebooted when the update is completed.
To Next Page
Loading...
