ELTEX NTU-RG-5402G-W - The Bridging Grouping Submenu. Interface Grouping; The Link Mode Submenu. LAN Ports Configuration

 NTU-RG-54xx. User manual (user)
46
1.
2.
3.
4.
4.5.4 The 'Bridging grouping' submenu. Interface grouping
In this section you can group the interfaces. By default all interfaces are in the same group. To place an
interface to a new group, you should:
Select a new group from the list below;
Select interfaces from the 'Available Interface' list;
Click the arrow ← to transfer the interfaces into the group;
Apply the actions by clicking the'Apply Changes'button
Advance → Bridge grouping
4.5.5 The 'Link mode' submenu. LAN ports configuration
In this submenu you can set the LAN ports operation mode. LAN1/2/3/4 – operation mode configuration;
available modes: 10M Half Mode, 10M Full Mode, 100M Half Mode, 100M Full Modeand Auto Mode (auto-
negotiation mode).
Advance → Link mode
To save the changes, click the 'Apply Changes' button.