ELTEX NTU-RG-5402G-W - The Bridging Submenu. Bridging Parameters Configuration

 NTU-RG-54xx. User manual (user)
44
•
•
•
•
•
•
4.5.2 The 'Bridging' submenu. Bridging parameters configuration
In this section you can configure bridge parameters. Here you can configure aging time of addresses in MAC
table as well as to enable/disable 802.1d Spanning Tree.
Advance → Bridging
Ageing Time –address lifetime (s);
802.1d Spanning Tree (Enable/Disable)–enable/disable 802.1d Spanning Tree protocol.
To save the changes, click the 'Apply Changes' button.
To view the information about bridge and its connected ports click the 'Show MACs' button.
Advance → Bridging→ Show MACs
Port – port number;
MAC Address – MAC address;
Is Local– local address;
Ageing Timer – address lifetime.
To update the information in the table, click the 'Refresh' button, to close the table, click 'Close'.