NTU-RG-54xx. User manual (user)
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
When selecting WPA/WPA2/WPA2 Mixed encryption mode, the following settings will be available:
Authentication Mode–Enterpris (RADIUS) or Personal (Pre-Shared Key) authentication mode: In the
Enterprise (RADIUS) mode perform next settings:
RADIUS Server IP Address– RADIUS server IP address;
RADIUS Server Port– RADIUS server port number. The default port is 1812;
RADIUS Server Password– Secret key for access to the RADIUS server;
IEEE 802.11w –enable service frame encryption;
None –disable service frame encryption;
Capable – encryption compatibility mode;
Required –encryption is required.
SHA256 (Enable/Disable)–enable/disable SHA256 usage.
WPA Cipher Suite– set of WPA TKIP or AES fonts;
Group Key Update Timer–key update timer;
Pre-Shared Key Format–key format: ASCII or HEX;
Pre-Shared Key–access key.
To see the encrypted access key, click the 'Show' button. To save the changes, click the 'Apply Changes'
button.
4.3.5 The 'Access Control' Submenu. Access settings
The menu allows filtering configuration for MAC addresses. All added MAC addresses will be displayed inCurr
ent Access Control List. When selecting the 'Allowed Listed' mode, only those MAC addresses that are in the
Current Access Control List can connect to the access point. When the 'Deny Listed' mode is selected, all MAC
addresses except those specified in the Current Access Control List will have access. To change the mode,
click the 'Apply Changes' button.
Wireless → wlan0 (2.4GHz) / wlan1 (5GHz) → Access control
Mode–MAC filtering mode:
Disabled –filter is not used;
Allowed Listed –filtering on the basis of allowed addresses (white list);
Deny Listed –filtering on the basis of denied addresses (black list).
MAC Address– field to add MAC address to the filtering table. To enter the value, click'Add'or
click'Reset'to reset the value.
To remove selected items in the list, click'Delete Selected';click'Delete All'to remove the whole list.
To Next Page
Loading...
