ELTEX NTU-RG-5402G-W - The Z-Wave Menu. for NTU-RG-5421 G-WZ

 NTU-RG-54xx. User manual (user)
58
•
•
•
•
•
4.9 The 'Z-Wave' menu. ForNTU-RG-5421G-WZ
Here you can configure 'Smart Home' parameters.
Zway – enable/disable the 'Smart Home' controller;
Hostname – specify the remote 'Smart Home' platform address;
Destination port – specify the platform port to which the 'Smart Home' controller connects;
Secure connection – set to Enable if a secure channel is used to communicate with the platform;
Reset controller (clear Zway cache) – when clicking this button, the controller disables; all information on
the platform connection, bound sensors and scenarios is removed.
To accept and save the settings, click the 'Apply Changes' button.