ELTEX NTU-RG-5402G-W - The Advanced Settings Submenu. Advanced Settings

 NTU-RG-54xx. User manual (user)
29
•
•
•
•
•
•
•
•
•
•
The 'Show Active WLAN Client' button outputs the table of active WLAN clients.
Wireless→ wlan0 (2.4GHz) /wlan1 (5GHz) → Basic settings→Show Active WLAN Client
MAC Address – MAC address of the client;
Tx Packets –amount of packets transmitted to the client;
Rx Packets – amount of packets received from the client;
Tx Rate (Mbps) – channel transmission rate, Mbps;
Power Saving – power saving mode;
Expired Time (sec) – address leasing expiration time, s .
To update the information in the table, click the 'Refresh' button, to close the table, click 'Close'.
4.3.3 The 'Advanced settings' submenu. Advanced settings
In this submenu you can perform advanced configuration of wireless network.
Wireless → wlan0 (2.4GHz) / wlan1 (5GHz) → Advanced settings
Fragmentation Threshold–set the fragmentation threshold, in bytes. If a packet size exceeds the value,
the packet is fragmented into parts of the corresponding size;
RTS Threshold–if the packet is smaller than the RTS threshold value, the RTS/CTS mechanism (with
request to send/clear to send packets) is not used;
Beacon Interval–time period for transmission of informational packets, which indicate activity of the
access point, to the wireless network;
Data rate–transmission rate;