ELTEX NTU-RG-5402G-W - The Ipv6 Submenu. Ipv6 Configuration

 NTU-RG-54xx. User manual (user)
47
•
•
•
•
4.5.6 The 'IPv6' submenu. IPv6 configuration
In this section you can enable/disable IPv6 operation. For this you should check 'Enable/Disable'.
Advance → IPv6
To save the changes, click the 'Apply Changes' button.
4.5.6.1 The 'RADVD' submenu. RADVD configuration
In this submenu you can configure RADVD (Router Advertisement Daemon).
Advance → IPv6 → RADVD
MaxRtrAdvInterval –maximum RA (Router Advertisement) sending interval;
MinRtrAdvInterval –minimum RA sending interval;
AdvManagedFlag –enable/disable 'Managed' flag sending in RA;
AdvOtherFlag –enable/disable Other RA flag sending.
To save the changes, click the 'Apply Changes' button.
4.5.6.2 The 'DHCPv6 setting' submenu. DHCPv6 server configuration
This submenu is used to configure DHCPv6 server. By default, it operates in auto configuration mode
(DHCPServer(Auto)) via prefix delegation.
Advance → IPv6 → DHCPv6