ELTEX NTU-RG-5402G-W - Page 48

 NTU-RG-54xx. User manual (user)
48
•
•
•
•
•
DHCPv6 Mode–select mode:
NONE–operation without DHCP server;
DHCPRelay–DHCP repeater operation mode;
DHCPServer (Manual)–manual configuration of DHCP server;
DHCPServer (Auto)–DHCP server autoprovisioning.
To save the changes, click the 'Apply Changes' button. After clicking on the 'Show Client' button, a table of
active DHCPv6 server IP addresses will be displayed.
Advance → IPv6 → DHCPv6→ Show Client
4.5.6.3 The 'MLD proxy' submenu. MLD proxy function configuration
In this section you can enable/disable MLD-proxy operation. For this you should check 'Enable/Disable'.
Advance → IPv6 → MLD proxy
To save the changes, click the 'Apply Changes' button.
4.5.6.4 The 'MLD snooping' submenu. MLD snooping function configuration
In this section you can enable/disable MLD-snooping operation. For this you should check 'Enable/Disable'.
Advance → IPv6 → MLD snooping
To save the changes, click the 'Apply Changes' button.