ELTEX TAU-8.IP - Factory Reset Procedure for TAU Gateway

____________________________________________________________________________________
____________________________________________________________________________________
18 VoIP subscriber gateways
Fig. 6 – Web-configurator guidance elements
User interface window is divided into four areas:
1. Information space displays the device name, software version, operation time after loading.
2. Menu to control field of settings
3. Submenu options to control field of settings.
4. Settings field of the device based on the user choice. It is destined for viewing the device settings
and configuration data entry.
5. Configuration control buttons:
– Apply – save the current configuration into non-volatile memory of the device and apply it;
– Cancel – reset the device configuration to the settings saved into non-volatile memory;
– Reboot – device reboot menu.
6. Log out is session termination button of the device access. TAU-8.IP includes two types of the
users: admin and user. Admin (by default, password is password) has the full access to the device
(read and write any settings, full device status monitoring). User (default password is user) may
access device status monitoring without reading and recording configuration data.
7. ‘Wizard’ tab for the device rapid configuration (see Appendix 2 for the detailed description).
To save changes into non-volatile memory, click ‘Apply’ button. In this case, settings for ‘Log’,
‘PBX’ and ‘Safety’ tabs are applied automatically. Reboot the device to apply changes for
‘System’, ‘Network’ and ‘Print Server’ tabs. Notice about restart behavior will appear in dialog
window and ‘Reboot’ button will change color to red.