____________________________________________________________________________________
____________________________________________________________________________________
VoIP subscriber gateways 99
APPENDIX 2. USAGE OF WIZARD MENU
Wizard menu allows you to configure gateway without large number of advanced setting parameters that
are usually installed by default.
The system automatically directs a user to the ‘Wizard’ menu at the first run.
You can use the quick settings by using the ‘Wizard’ menu or browse to the more detailed gateway
configuration by selecting the other tab on the current page of web-configurator.
The menu consists of several configuration steps. To pass to the next step, click ‘Next’ button. To return to
the previous step, click ‘Previous’ button. After checking data entered, you should apply configuration by clicking
‘Apply’ button.
Step 1. Protocol
Selecting the used protocol for connection via TCP/IP – DHCP, Static, PPPoE, PPTP, L2TP, 3G/4G USB
modem. Configuration of all the ports is described above in this user manual.
Step 2. Network Settings
In dependence to selected protocol, the following parameters must be set up: VLAN ID, WAN IP address,
WAN netmask, 1st DNS-server, 2nd DNS-server, Default Gateway, PPTP/L2TP Server address and others. The
more detailed description of the options is given above.
To Next Page
Loading...
