____________________________________________________________________________________
____________________________________________________________________________________
VoIP subscriber gateways 21
– Daylight saving (DST start) – setting of the moment and time of daylight saving by the format of
‘week number, day, hour, minutes’, for example the last Sunday of July at half night;
– DST end – you can set date and time of
daylight saving time (DST) in the format
‘week number, week day, month, hours,
minutes’, for example, the second Sunday
of October, 00 hours 00 minutes;
– DST offset (minutes) – set the time shift
value, in minutes;
– Enable NTP – set the flag to enable synchronization of the device system time from specified NTP
server.
– NTP Server – IP-address/domain of NTP-server.
Access Ports:
– HTTP port – specify port for access via HTTP protocol;
– HTTPS port – specify port for access via HTTPS protocol;
– Telnet port – specify port for access via Telnet protocol;
– SSH port – specify port for access via SSH protocol;
– FTP port – specify port for access via FTP protocol.
To save changes into non-volatile memory of the device, click ‘Save Changes’ button. To record settings
into non-volatile memory, click ‘Apply’ button.
3.1.1.2 ‘Access passwords’ submenu
Use the submenu to assign passwords for administrator and unprivileged user.
TAU-8.IP includes two types of the users: admin and user. Admin (by default, password is password) has
the full access to the device (read and write any settings, full device status monitoring). User (default password
is user) may access device status monitoring without reading and recording configuration data.
Administrator password is used for administrator access via Web-interface, Telnet and SSH protocols.
User password is used for unprivileged user access via Web, Telnet, SSH and FTP.
To Next Page
Loading...
Need help?
General
