ELTEX TAU-8.IP - Log Menu; Syslog Settings Submenu

____________________________________________________________________________________
____________________________________________________________________________________
VoIP subscriber gateways 87
4.3 ‘Log’ menu
Access to the ‘Log’ menu is performed on the administrator privileges.
4.3.1 ‘Syslog Settings’ submenu
Use the submenu to perform parameter settings for output of remote/local log.
Syslog Settings:
– Output trace to – mode of syslog output:
– console – display log into continuous console of the device (continuous console is
connected via COM port by using special adapter; connection parameters are 115200, 8,
n, 1 and n);
– syslogd – trace is displayed into remote and local log;
– disable – trace is disabled;
– telnet session 0 (1, 2, …) – if the device is connected via Telnet protocol you may display
trace in the of active Telnet-session.
Remote log:
– Syslog server address – IP address or domain name of remote log server; empty field means that
the remote log is not used;
– Syslog server port – server port to record remote log (the default value is 514).
Local Log:
– Log file name – fill in this field by file name (file will be recorded into catalog /var/log;
– Log file size (kB) – file size in kB.