EM Test CWS500 N2
User manual V 3.00 31 / 38
Interfaces
Serial Interface USB
Parallel IEEE 488 GPIB interface Addresses 1 - 30 selectable
All interfaces are included as standard features.
Powermeter PM 1000
Frequency range 9kHz – 1000 MHz
Input range Monitor -45 dBm ... +13 dBm
FWD power -50 dBm ... +13 dBm
REV power -50 dBm ... +13 dBm
Max. Input MONITOR 13dBm approx. 1.3 Vrms
Accuracy < 0.5 dB ( 0.1MHz...400MHz )
< 1.0 dB ( 0.009MHz...1000MHz )
Bi directional coupler
Frequency range 9 kHz .. 1000MHz
Power (maximum) 200Watt
Coupling factor 40 dB
Directivity 25 dB typical
Insertion loss approx. 1 dB ( including relays )
VSWR 1.25 maximum
RF Amplifier 100W ( built in )
Frequency range 9 kHz .. 400 MHz
Output power nominal 20kHz...300MHz 50dBm
Output power minimum 9kHz...400MHz 47dBm
Gain approx. > 51dB
Compression at nominal output power 1dB (typical)
Harmonic distortion > 20dBc at max. power
General data CWS500N2
Dimensions ( HxWxD) 19"/6HE (286 x 450 x 500) mm
Weight approx. 31.5kg
Power supply 110-230V/ 50/60Hz
Input power max. 780W
Power factor cos=0,98 at max output power acc. to IEC 555
Fuse 2x6,3AT (115V / 230V)
Cooling active cooling, air ventilation
Environment conditions 10°C - 40°C
Humidity Max. rel. humidity 80% up to 31C Decreasing linearly to 50% at 40C
To Next Page
Loading...
