EM TEST CWS 500N2 - 9 Delivery Groups; Basic Equipment; Options and Accessories

EM Test CWS500 N2
User manual V 3.00 36 / 38
9.
Delivery Groups
9.1.
Basic equipment
- Continuous wave simulator type CWS 500N2
- Mains cable
- Manual CWS 500N2 on delivered CD
- Calibration certificate
- icd.control software available on CD
- Cable with N type connectors
Identical accessory parts are delivered only once if several devices are orderes. The delivered packing list is in
each case valid for the delivery.
9.2.
Options and Accessories
Accessories
C-IEEE
IEEE cable for CWS computer interconnection
Set C-BNC
BNC cable for current monitor probe
AD-N-BNC
N to BNC adapter for ATT20/15
Options
ATT3/100
Attenuator for BCI, 3dB /100W
ATT20/15
2 x 20dB/15W attenuator for current monitor path
T-50 A
50 Ohm / 6 W matching resistor
BCI set of clamp, fixture and monitor probe for MIL461E DO160
F-120-6A
Clamp-on injection probe, 10kHz - 400MHz, 40mm
FCC-BCICF1
Injection probe calibration fixture (jig) for F-120/F130 probe types
F-55
Clamp-on monitor probe, 10kHz - 500MHz, 32mm diameter
ATT 6/75
Attenuator 6dB / 75 W
R-100
150 to 50 Ohm Adaptor
R-100A
150 to 50 Ohm Adaptor with N-type-connector for current clamp calibration
T-50
50 Ohm Termination
Accessories for IEC 61000-4-6 test application
KIT-IEC-6
Cable and adapater kit consisting of 2 BNC cables 25cm each, 1 BNC cable
50cm, 2 adapters N-BNC and 1 adapter BNC-N
Coupling networks ( CDN)
as per IEC 61000-4-6 Wide range of different CDN’s
Coupling clamps
EM clamp as per IEC 61000-4-6 for coupling of the RF signal to multiple
cables.Current injection clamp acc. To IEC 61000-4-6
Current Probe
acc. IEC 61000-4-6
Cal adapters
For all types of CDN’s and clamps ( manufactured and delivered by EM Test )
ATT 6/75
Attenuator 6dB / 75 W
R-100N
150 to 50 Ohm Adaptor
R-100A
150 to 50 Ohm Adaptor with N-type-connector for current clamp calibration
T-50
50 Ohm Termination
Software for PC control
User software "icd.control" Control, protocol, Cal measurements for different Coupling devices
Generation of analysis and documentation under windows (see separate
documentation)