Emaldo Power Core User Manual
or damage of the battery in the box, which may lead to battery leakage, rupture, explosion
or ignition.
Conditions for shipment:
• Before shipment, check whether the battery is intact and there is no obvious odor, smoke,
fire and other phenomena; otherwise, shipment is prohibited.
Requirements for transportation process:
• Sea transportation shall comply with IMDG CODE and the International Maritime
Dangerous Goods Code.
• Land transportation shall comply with ADR or JT T617 transportation requirements.
• Regulatory requirements of the transport regulatory authorities at the countries of
departure, transit and destination shall be met.
• The international rules for the transport of dangerous goods and the regulatory
requirements of the transport regulatory authorities of the corresponding countries shall
be observed.
During handling or transportation, it is forbidden to:
• Be directly exposed to rain and snow or fall into the water.
• Drop or have mechanical impact.
• Invert or dump.
1.9 Installation environment requirements
Important
• The operation and service life of the energy storage system are related to the operating
temperature. Please install the energy storage system at the temperature equal to or
better than the ambient temperature.
• When the ambient temperature is -20~50℃, if the system is installed in a cold
environment, the system will start the built-in thermal control system to heat the battery to
obtain better performance. The heating process will consume rechargeable power, which
means that the energy efficiency of the system will be reduced in a short time.
• If the system is stored in a cold environment (for example, 0°C) before installation, it will
To Next Page
Loading...
