Emaldo Power Core User Manual
• Static electricity may damage electronic components. Please take appropriate measures
during operation to prevent damage to the equipment. Failure to do so may invalidate the
warranty.
• Ensure that the output voltage of the proposed photovoltaic array is lower than the
maximum rated input voltage of the energy storage system; Otherwise, the energy storage
system may be damaged and the warranty will be invalid.
• Solar modules shall have IEC61730 A rating.
1.6 Electrical safety
Warning: Explosion, electric shock, fire disaster
• Ensure that all cables have the right size.
• Ensure that the energy storage system meets the spacing requirements.
• Ensure that the installation environment of the energy storage system is well
ventilated and there is no residue nearby.
• Smoking is prohibited near the energy storage system, and sparks or flames
are strictly prohibited.
• Use insulation tools and avoid throwing them on the energy storage system or
other electrical components.
• The battery is prohibited from charging in the frozen state.
Important
• Please use the battery type recommended by EMALDO. Please follow the manufacturer's
instructions for battery installation and maintenance.
• Properly isolate the energy storage system to resist low temperature. Discharging
batteries freeze more easily than charging batteries.
1.7 Battery safety
Important
The Company will not be responsible for abnormal equipment function or component damage,
personal safety accidents, property losses, etc. caused by the following reasons:
To Next Page
Loading...
