EasyManua.ls Logo

emaldo Power Core - Page 10

emaldo Power Core
67 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Emaldo Power Core User Manual
6
Copyright©EMALDO
• The battery is not charged in time due to customer's reasons, so it is stored for an
extended period, resulting in capacity loss or irreversible damage to the battery.
• Battery damage, drop, liquid leakage, etc. are caused by improper operation or failure to
connect the battery as required.
• The battery is installed on site and connected to the system, and over-discharged due to
the customer's failure to power on in time, resulting in damage.
• The user fails to set the battery operation management parameters correctly.
• The customer or the third party changes the battery usage scenario without informing the
Company. For example, the battery provided by the Company is mixed with other batteries,
including but not limited to mixing with other brands of batteries, mixing with batteries
with different rated capacities, etc.
• Direct damage is caused to the battery due to the field equipment operating environment
or external power parameters failing to meet the environmental requirements of normal
operation. For example, the actual operating temperature of the battery is too high or too
low, the power grid is unstable and power outages are frequent.
• Improper maintenance of customers causes frequent over-discharge of batteries, capacity
expansion of customers on site or long-term inability to fully charge.
• The customer fails to properly maintain the battery according to the operation manual of
the supporting equipment, including but not limited to failing to regularly check whether
the battery terminal and the cabinet are firmly connected.
• The battery is stolen.
• The battery exceeds the warranty period.
Danger
• Do not expose the battery to high temperature environment or around heating equipment,
such as sunshine, fire source, transformer and heater. Overheating of the battery may
cause fire and explosion.
• It is forbidden to disassemble, modify or destroy the battery (such as inserting foreign
objects, and immersing in water or other liquids) to avoid leakage, overheating, fire or
explosion of the battery.

Other manuals for emaldo Power Core

Related product manuals