Emaldo Power Core User Manual
• The fire hazard of lithium ion/sodium ion battery energy storage system is Class A or Class
B. The following safety risks should be fully considered before battery operation:
a. Battery electrolyte is flammable, toxic and volatile.
b. The thermal runaway of the battery will produce combustible gas, as well as harmful
gases such as CO and HF.
c. There is a risk of deflagration and explosion in the accumulation of combustible gas
generated after the thermal runaway of the battery.
Personal safety
• Appropriate personal protective equipment should be worn during equipment operation. In
case of any fault that may cause personal injury or equipment damage, immediately stop
the operation, report to the person in charge, and take effective protective measures.
• Before using tools, please master the correct use of tools to avoid personal injury and
damage to equipment.
• When the equipment is running, the shell temperature is high and there is a danger of
burning. Please do not touch it.
• In order to ensure personal safety and normal use, reliable grounding should be carried out
before use.
• When the battery fails, the temperature may exceed the burn threshold of the touchable
surface, so contact should be avoided.
• Do not open or damage the battery. The released electrolyte is harmful to the skin and
eyes, and contact should be avoided.
• Do not put irrelevant items on the top of the equipment or insert them into any position of
the equipment.
• Do not place flammable items around the equipment.
• Never put the battery into fire; otherwise, it may cause explosion or endanger personal
safety.
• Do not place the battery module in water or other liquids.
• Do not short-circuit the battery terminals, which will cause combustion.
To Next Page
