Emaldo Power Core User Manual
• The battery may cause the danger of electric shock and large short-circuit current. When
using the battery, please pay attention to the following precautions:
a. Remove watches, rings and other metal objects.
b. Use tools with insulated handles.
c. Put on rubber gloves and boots.
d. Do not place tools or metal parts on the top of the battery.
e. Disconnect the charging power supply before connecting or disconnecting the battery
terminals.
f. Determine whether the battery is accidentally grounded. If it is accidentally grounded,
please remove the power supply from the ground.
• Do not use water or detergent to clean the electrical components inside and outside the
cabinet.
• Do not stand on, lean against or sit on the equipment.
• Do not destroy each module of the equipment.
Basic requirements
• The battery must be stored separately and in the outer packaging, so as to avoid being
mixed with other items, stored in the open air and stacked too high.
• The battery beyond the warranty period is prohibited from continuing to be used.
• Under normal circumstances, do not remove the battery packaging. If the battery needs to
be recharged, recharging is carried out by professionals as required. The battery still needs
to be put back into the package after recharging is completed.
• The battery should be carried in the direction required by the battery, and it is forbidden to
turn upside down or tilt.
• Batteries should avoid collision.
• Welding, grinding and other similar work around the battery are prohibited to avoid sparks,
arc and other fire hazards.
• Please use the battery within the operating temperature range specified in the Manual.
To Next Page
