Emaldo Power Core User Manual
topography (including dams and hills).
1.10 Mechanical requirements
Drilling safety
• The following safety precautions should be considered when drilling in the wall and
ground: Goggles and protective gloves should be worn when drilling.
a. During drilling, the equipment should be shielded to prevent debris from falling into
the equipment.
b. After drilling, the debris should be cleaned in time.
Safe handling of heavy objects
• When carrying heavy objects, prepare to bear the load to avoid being crushed by heavy
objects or sprained.
• Wear protective gloves when handling equipment by hand to avoid injury.
1.11 Adjustment and test
When the equipment is powered on for the first time, the parameters need to be set correctly
by professionals. Wrong settings may cause the equipment to be inconsistent with the
certification of the country/region where it is located, which will affect the normal operation of
the equipment.
1.12 Maintenance and replacement
Danger
During the operation of the equipment, there is high voltage, which may cause electric shock,
To Next Page
Loading...
