Ematic EM102VIDBL - Loading Files to the MP3 Player; Transferring Non-Protected Files; Synchronizing DRM-Protected WMA Files

7
Loading files to the player
To download the files from your computer, perform the following steps:
Files that are not copy-protected
1. Open the Windows Explorer or My computer.
“Removable Disk” (MSC mode) or “Audio Player” (MTP mode) is displayed.
2. Select the files on your computer and simply move it into the “Removable Disk” or “Audio Player” in the usual way (drag-and-drop, or
copy-and-paste). After copying is completed, the data will be available on the player.
DRM-protected WMA files (MTP mode)
Do not copy and paste WMA with DRM-protected files to the player directly. The file will not play unless it is transferred using the following procedures.
1. Make sure the MP3 player is in MTP mode.
2. Launch Windows Media Player 10 or above.
3. Select the “Sync” tab in the window.
4. In the “Sync” window, select “Audio Player”, then drag and drop the DRM-protected WMA files into the “Sync List”.
5. Click on “Start Sync”. You DRM-protected tracks will be synchronized with your MP3 player.
Note:
 The synchronization procedures can also be used to transfer and manage the files without DRM-protected function.
 For details about usage of Windows Media Player, refer to the Windows Media Player Help.
 Please do not disconnect the USB cable during loading or synchronizing. It may cause malfunction of the player and the files.