This manual contains important SAFETY information regarding the installation
and operation of the device.
Read and keep for future reference.
Carefully follow this information to prevent personal injury and property damage.
The information in this manual may contain inaccuracies or typographical errors.
The information contained in this manual is subject to change at any time
without notice.
Version: R3-02-24
NORME CE
EC RULES (STANDARD EC)
NORMAS DE LA CE
Direttiva Basso Voltaggio
Low Voltage Directive
Directiva de baja tensión
!!!!2014/35/EU
Direttiva EMC Compatibilità Elettromagnetica
EMC electromagnetic compatibility directive
EMC directiva de compatibilidad electromagnética
2014/30/EU
Norme armonizzate europee nell’ambito della direttiva
European harmonized standards underdirective
Las normas europeas armonizadas conforme a la directiva
2006/42/EC
GENERAL NOTES ON SAFETY
During installation, testing and inspection it is mandatory to comply with the
following management and safety instructions.
SYMBOLS
The following symbols are used in this document. Familiarise yourself with the
symbols and their meanings before proceeding with the installation or use of
this tool.
Danger!
Indicates a potential hazard which could result in death or serious injury to
persons if not avoided.
Caution!
Indicates a potential hazard which could result in minor injury to persons
and/or damage to property if not avoided.
Both indicate important information to be observed in any case.
Important! - Indicates a potentially dangerous situation which may result in
an undesirable outcome or state if not avoided. A practice unrelated to
personal injury.
⎘" Cross-reference - This symbol indicates a reference to a specific page or
paragraph in the manual.
To Next Page
Loading...
