TRANSPORT AND
STORAGE
The pump may become damaged by unsuitable transport or storage.
Store and transport the pump properly packed, preferably in its original
packaging.
Observe the storage conditions for transport as well.
Even if packed, always protect the device from moisture and the action of
chemicals.
Before returning the pump to the service department, remove all liquid
inside the pump body and dry it BEFORE packing it in its original box.
Follow the procedure described in ⎘"Stop procedure.
After emptying the pump body, if there is still a chance that any highly
corrosive liquid may cause damage, this must be declared on the REPAIR
REPORT form.
DO NOT DISCARD PACKAGING. REUSE IT FOR TRANSPORT.
Packaging and transporting temperature …………….10 to 50°C (32 to 122°F)
Atmospheric humidity ................ 95% relative humidity (non-condensing)
To Next Page
Loading...
