ENVIRONMENTAL
SAFETY
Work area
Always keep the area where the pump is installed clean to avoid and/or detect
emissions.
Recycling instructions
Always recycle materials according to the following instructions:
1.
Follow local laws and regulations regarding recycling if the unit or certain
parts are accepted by an authorised recycling company.
2.
If the unit or parts are not accepted by an authorised recycling company,
return them to the nearest representative.
Waste and emission regulations
Comply with these safety regulations concerning waste substances and emissions:
•
Dispose of all waste properly.
•
Treat and dispose of pumped liquid in accordance with applicable environmental
regulations.
•
Clean up all liquid spills in accordance with environmental and safety procedures.
•
Report all environmental emissions to the appropriate authorities.
LABEL
Data
CODE: pump code
MODEL: pump model
PUMP DATA
S/N (serial number)
(example)
Data
matrix
Spare parts Please refer to the pump label when ordering spare parts or in general for
communications.
In particular, the code (CODE) and the serial number (S/N) uniquely identify
the pump in question.
FIRST
START-UP
When switching the dosing pump on for the first time or after a reset to
factory settings, the system language must be chosen from those available.
CER RECYCLING CODE: 16 02 14
To Next Page
Loading...
