Emerson EIM 2000 Series - Analog Input Calibration; Analog Output Calibration; Select Modulation Delay Timing

8
August 2017
Installation and Maintenance Manual
E2K-401-0817 Rev. 1
MCP and Electrical Hook Up
Section 3: MCP and Electrical Hook Up
3.1 Modular Control Package - MCP
Electrical components are EIM factory assembled, wired and tested as a module,
with three possible MCP congurations.
1. MINI FRAME – Position LimitSwitches, Torque Limit Switches, and Terminal Strip.
(No Controls).
Figure 4 Mini MCP Frame
2. SHORT FRAME – Furnished when Reversing Contactor or additional electrical
controls are supplied.
Figure 5 Short MCP Frame
Section 3: MCP and Electrical Hook Up