13
Installation and Maintenance Manual
E2K-401-0817 Rev. 1
August 2017
Torque Switch TSC and TSO Setting
Section 5: Torque Switch TSC and TSO Setting
5.1 Description
EIM Torque Switch senses mechanical over load in Close (TSC) or Open (TSO) direction.
Worm is supported with bi-directional disc spring stack. As worm and gear torque
increases, the worm moves axially against spring allowing Torque Limit Gear Assembly to
rotate Part No. 1050, Torque Switch.
Part Number 1050 has N.C. contact for (LSC) and (LSO). Part number 1050-1, in addition to
N.C. also provides a N.O. contact.
Figure 10
Section 5: Torque Switch TSC and TSO Setting
To Next Page
Loading...
