Emerson EV2000 Series - Page 99

Appendix 1 Parameters 95
EV2000 Series Universal Variable Speed Drive User Manual
Group F4: Operating Parameters
Para Name LCD Display Setting range Unit
Factory
setting
Modif.
F4.02
Operating time
in Phase 1
STAGE 1
TIME
0.0 ~ 6500 0.1 20.0
○
F4.03 Phase 2 setup
STAGE 2
SET
Unit’s place of LED: Frequency setting
0:Pre-set frequency 2(F3.24) 1:Decided by F0.00 parameter
2:Close loop reference 2(F5.21) 3:Decided by F5.01 parameter
Ten’s place of LED: Running direction selection
0:Run forward 1:Run reverse
2:Decided by operating instructions
Hundred’s place of LED: Acc/Dec time selection
0:Acc/Dec time 1 1:Acc/Dec time 2
2:Acc/Dec time 3 3:Acc/Dec time 4
1 000
○
F4.04
Operating time
in Phase 2
STAGE 2
TIME
0.0 ~ 6500 0.1 20.0
○
F4.05 Phase 3 setup
STAGE 3
SET
Unit’s place of LED: Frequency setting
0:Pre-set frequency 3(F3.25) 1:Decided by F0.00 parameter
2:Close loop reference 3(F5.22) 3:Decided by F5.01 parameter
Ten’s place of LED: Running direction selection
0:Run forward 1:Run reverse
2:Decided by operating instructions
Hundred’s place of LED: Acc/Dec time selection
0:Acc/Dec time 1 1:Acc/Dec time 2
2:Acc/Dec time 3 3:Acc/Dec time 4
1 000
○
F4.06
Operating time
in Phase 3
STAGE 3
TIME
0.0 ~ 6500 0.1 20.0
○
F4.07 Phase 4 setup
STAGE 4
SET
Unit’s place of LED: Frequency setting
0:Pre-set frequency 4(F3.26) 1:Decided by F0.00 parameter
2:Close loop reference 4(F5.23) 3:Decided by F5.01 parameter
Ten’s place of LED: Running direction selection
0:Run forward 1:Run reverse
2:Decided by operating instructions
Hundred’s place of LED: Acc/Dec time selection
0:Acc/Dec time 1 1:Acc/Dec time 2
2:Acc/Dec time 3 3:Acc/Dec time 4
1 000
○
F4.08
Operating time
in Phase 4
STAGE 4
TIME
0.0 ~ 6500 0.1 20.0
○
F4.09 Phase 5 setup
STAGE 5
SET
Unit’s place of LED: Frequency setting
0:Pre-set frequency 5(F3.27) 1:Decided by F0.00 parameter
2:Close loop reference 5(F5.24) 3:Decided by F5.01 parameter
Ten’s place of LED: Running direction selection
0:Run forward 1:Run reverse
2:Decided by operating instructions
Hundred’s place of LED: Acc/Dec time selection
0:Acc/Dec time 1 1:Acc/Dec time 2
2:Acc/Dec time 3 3:Acc/Dec time 4
1 000
○
F4.10
Operating time
in Phase 5
STAGE 5
TIME
0.0 ~ 6500 0.1 20.0
○
F4.11 Phase 6 setup
STAGE 6
SET
Unit’s place of LED: Frequency setting
0:Pre-set frequency 6(F3.28) 1:Decided by F0.00 parameter
2:Close loop reference 6(F5.25) 3:Decided by F5.01 parameter
Ten’s place of LED: Running direction selection
0:Run forward 1:Run reverse
2:Decided by operating instructions
Hundred’s place of LED: Acc/Dec time selection
0:Acc/Dec time 1 1:Acc/Dec time 2
2:Acc/Dec time 3 3:Acc/Dec time 4
1 000
○
F4.12
Operating time
in Phase 6
STAGE 6
TIME
0.0 ~ 6500 0.1 20.0
○