4195KA, KB, KC, and KS Controllers
Instruction Manual
Form 5207
April 2007
7-18
48A2905-A / DOC
APPLY LUB / SEALANT
A
A
B
B
C
C
SECTION A-A
SECTION C-C
SECTION B-B
Figure 7-7. Auto/Manual Station Assembly
Key Description Part Number
296 Ball, SST (2 req’d) 1J1550X0012
297 Lever ass’y, SST 18A2866X012
298* O-ring, nitrile 1E222606992
299 Rocker, A96061 (aluminum) 18A2871X012
300 Clip, SST 18A2872X012
301 Lever spring seat, SST 18A2870X012
302 Lever spring, K08500 (pl steel) 18A2895X012
303 Groove pin, SST 16A6380X012
Key Description Part Number
304 Switch lever, polycarbonate/SST 38A2897X012
305 Switch lever cover plate, aluminum/chromate 18A2873X012
306* Closing plate gasket, chloroprene 18A2898X012
307 Closing plate, SST 18A2875X012
308 Machine screw, pan hd, 18−8 SST
(2 req’d) 18A2899X022
309 Tubing ass’y, SST 28A2863X012
310 Lithium grease (not furnished with controller)
311 Anti-seize sealant (not furnished with controller)
*Recommended spare parts
To Next Page
Loading...
